How to Replace a kia picanto key fob Sportage Replacement Key

The key of a lot of Kia models has a keyless entry system built in. The key functions like an remote control, and can be exchanged with a Kia dealer.

Key fobs may stop working due to a variety of reasons, such as an inactive battery, worn out buttons signals, signal interference or water damage. Here are some tips on how to get your Kia Sportage replacement key to function again.

How to replace a remote key or a smartkey?

The battery inside your Kia's smart key will eventually need to be replaced, whether it is a remote key or a push-to-start one, or a regular key that is not equipped with an electronic transponder. This is particularly true if your car displays a message indicating that the remote or smart keys have low battery power.

It's a simple procedure. To replace the battery in the keyfob remove the mechanical key from the slit on the back of the fob. Then, you need to pry the cover open. A small screw is inside the key fob to keep the battery in its place. Remove the old battery by unscrewing the screw with a small screwdriver. Insert the new battery and close the gap on the key fob.

Test the key fob by pressing the lock/unlock buttons. If the doors lock and unlock in the same way, you're all set! You can now utilize the hands-free feature to lock and unlock your Kia when your fingers get cold or when you need to go on errands around Brandon.

Note: Some keys may require to be programmed (transponder chips or smart keys). This requires a specific programming machine that only the dealer or locksmith can access. Other keys (non transponder metal keys) don't require programming. If your key has to be reprogrammed, then you must be aware of the key code that is stamped on the tag of the key code and save it in a safe location.

How to replace a battery

If your Kia key fob is not responding to pressing the lock or unlock button on the fob, it is a good indicator that the battery needs to be replaced. A low battery could cause other issues such as the check engine light flashing on or delayed cranking of the engine. It is relatively easy to replace key fob batteries using just the use of a few tools.

Make sure you turn off your vehicle and close the doors before you begin. Find the small metal or a plastic piece that is located at the bottom of the key fob. Press it until the metal key falls out. The key can be put into the door's driver handle to unlock your car.

To replace the battery in the key fob, remove the rear cover. Use a pry tool to remove the latch that holds the black negative cable. Take the old battery out, and then position the new battery in a way that its "+" side is facing you, and the "-" negative side is facing the fob's electrical contacts. Push the new CR2032 battery straight into place, avoiding excessive force to avoid damaging or breaking the metal contacts.

Once the new battery has been installed then turn the key fob off and on in the ignition several times until the door locks. You can then test your kia spare key's keys fob to ensure it is working correctly.

How can you replace the smart key

Depending on the model of the Kia Sportage, you may have the standard key fob, or a smart key. The smart key is equipped with an embedded mechanical key blade, however, the standard key fob does not. Both key fobs are equipped with a battery that will eventually require replacing. Fortunately, it's quite simple and will take about two minutes.

Before you get started before you begin, ensure that you're on a level surface with good lighting and that your Kia is turned off. Be aware that there are tiny parts inside the fob that could fall out if not cautious.

The first step is to find the small release button on the lower backside of your fob. It's either a circular button or a rectangular slot. When you press it mechanical key blade, it will come out and you will be able to open the key fob.

Once you have the key fob opened then you can remove the old battery, and replace it. The new battery is a CR-2032, and Kia Sportage Replacement Key can be bought online or in your local auto parts shop. After you're done, your key fob will allow you to lock and unlock your vehicle even if it's not running.

How to replace the mechanical key

The Kia keyfob is a great convenience, allowing us to lock or unlock our car with just pressing the button. But like any device there are issues with it from time to time. There are methods to solve these issues and keep our key fobs in good condition for the long term.

One of the most frequently encountered issues is a low or dead battery. The battery could cause the device to stop working or operate intermittently. If this happens try replacing the battery with a new one.

If this doesn't resolve the problem, try using a standard flathead screwdriver and wedge it into the casing of the fob's plastic. Be careful not to harm any internal components or scratch the plastic. Once the battery is opened, carefully remove the battery that was removed and replace it with a new one.

Close and open the door with the mechanical key. (Every kia picanto key replacement fob comes with a spare mechanical key which will fit into the slot). Test the key fob to ensure it's working as intended. If the key fob isn't working, call a locksmith or dealer to help resolve the problem. To avoid lockouts in the future, ensure you purchase an emergency key that will work on all trunk and door cylinders.