Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. They don't decay or rust as timber and aluminum.

It is important to clean and oil UPVC windows and doors regularly. This will reduce unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home, and could even be fatal. It is important to take the time to ensure that you're doing all you can to keep your windows in good repair.

For single pane windows it can be relatively simple to replace them, and the replacement will usually fit inside the old frame very easily. If windows with double panes are joined by internal beading, it will be harder to remove and replace the panes that were previously in use. In this instance, you will need to find some plastic spacers that help the new pane to fit perfectly into the frame of the window.

If you're planning to attempt to remove the glass panes yourself it is important to wear the appropriate safety equipment, including thick gloves and protective eyewear. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards fall on the fabric and not on the floor which could cause them to be trampled under.

After the glass has been removed and the glass is removed, it's a good idea to cover the gap with packaging tape or duct tape to stop water and drafts from entering the property until a professional is able to come out and fix the window. It also acts as a barrier to prevent any intruders from getting into your home. If the gap is large, you may be interested in the security door with an integrated window, since it will provide the best of both worlds.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash window. However, with time, they may be afflicted by a variety of problems including sliding. A sagging window in uPVC can cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from getting worse.

Repositioning the hinges could help fix a window doctor near me that is sliding. To accomplish this, you'll have to open the window so that you can access the frame. Then, you can remove the hinges at the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you have repositioned your hinges. If you're satisfied with the fit, tighten the screws until they stay in the right place.

If you are unable to move the hinges, you might have to replace the seal. As time passes, rubber seals lose their elasticity and become dry, which causes them to loosen. If this happens, it's important to replace the seal as quickly as possible so that your uPVC windows are watertight and draught-proof.

uPVC handles could also loosen. This is often caused by screws that have been removed over time, but it could be caused by the handle mechanism getting worn out. Luckily, it's not difficult to fix the handle of a window that is loose yourself. First, you'll need close the window and perform a test to ensure that it fits. The corner joints of the sash should align with the casing joint. If it isn't, you can make use of a screwdriver to loosen the handle, and then turn the mechanism back into its original position.

3. Water Leaks

It is important to take action if awake each day to find mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home, and hinder your ability to control the temperature in your home. The most common reason for leaking uPVC windows is that the sealant around the frame has been damaged or uPVC window repairs missing.

This is an easy fix that can be completed by any DIYer who is competent. Depending on how severe the issue is, old caulking might need to be removed. It is crucial to remember that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk and then make the area more difficult to clean and reduce the efficiency of your energy.

It is important to check that any drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more extreme situations, you may have to replace the window.

Other indicators of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can quickly spread across the home.

It is also important to keep in mind that if the leakage is coming from between the glass in your double glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sliding. This can be easily corrected by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window doctor is difficult to open, or if it blows open with a breeze. They can be replaced by any competent DIYer and can usually be completed in a matter of minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that are hinged and, just like any mechanical component they can wear down over time. It's easy to replace a hinge on a window however it is simpler if you have someone to help you to hold the frame.

Make sure that the uPVC hinges are closed and open in the proper direction. Check for the arrows on each hinge to determine which direction the window should be opened.

Faulty window hinges could be caused by improperly opening the window a certain manner or because of poor installation at the factory. Sending us a photo via our website will often solve the issue. We are always happy to provide suggestions.

Regular lubrication of the hinges is essential. Applying a light engineering lubricant on the hinges is a great method to accomplish this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the chance of windows sticking and prevent corrosion. Ideally, you should do this once a year. WD40 and other solvent-based lubricants are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. The hinges, also because of wear and tear, can become misaligned, this causes a gap to form between the sash and the frame. If they are damaged beyond repair, it may be necessary to have them realigned. The interlock, which is located on the hinge of the window, may be misaligned. Again, it is possible to just give them a thorough clean, however in some cases it might be necessary to get them replaced.

The second most frequent reason for draughts is window seals, these can become worn down or damaged over time and let air escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help regulate indoor temperatures and lessen the risk of draughts.

Another method of reducing the amount of draughts is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler which can be placed over your window sill. They can keep your home warm by blocking out cold air.

The windows made of upvc can remain a great source of insulation and security in your home with regular maintenance and repairs. However, it is important to realize that windows last for a certain period of time and eventually, they will reach the point when it's more economical to replace them than fix them. If you are having issues with your upvc windows, it is recommended to seek help from a professional immediately.