Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they are not susceptible to rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help avoid unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large deal of damage to your home, making it very hazardous and possibly fatal. It is crucial to take the time to ensure that you are doing everything you can to keep your windows in good condition.

For single pane windows it can be relatively simple to replace them, and the new window will generally fit within the frame that was previously installed easily. However, if you have double glazed window repairs pane windows that are held in place by internal beading, it will be more difficult to take out the existing panes and install new ones. In this instance it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass by yourself. It is also recommended to lay down a dropcloth before you start working on the glass to ensure that any shards will fall on the fabric rather than on the floor where they can be trodden under and cause further damage.

After the glass has been removed and the glass is removed, it's a good idea to cover the gap with packaging tape or duct tape to block drafts and water from entering the home until a professional comes out and repair the window. This will also provide an obstruction to prevent criminals from getting into your home. If the gap is large, you might want to consider using a security door that has an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows with sash. However, with time, they can suffer from a variety of issues, window Repair including sliding. A window that is sagging can cause problems with light, draughts, and even security. It is crucial to act when you notice your uPVC windows are sagging.

Repositioning the hinges can help fix a window that is sliding. You'll first need to open the windows so you can reach the frame. You can then unscrew both the top and bottom hinges using a screwdriver and adjust them clockwise or counter-clockwise. Once you've repositioned the hinges, close the window repair (tntech.kr) and verify the an appropriate fit. If you are happy with the size of the window, tighten the screws to keep them in the right position.

If you cannot reposition the hinges, you might have to replace the seal. Rubber seals can dry out and lose their elasticity with time, which causes them to lose their tightness. It is crucial to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles could also loosen. This is often caused by screws that have been removed over time, but it can be caused by the handle mechanism wears out. It's relatively simple to fix a loose uPVC handle. First, you'll need close the window and perform a test to ensure that it fits. The corners of the sash need to align with the casing joint. If it isn't, you can use a screwdriver or a wrench to loosen the handle and then turn the mechanism back into the position it was in.

3. Water Leaks

It is crucial to take action if awake each day to discover mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home, and affect your ability to regulate the temperature inside your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

It is a fairly easy fix and should be undertaken by any DIY expert. Depending on how serious the issue is, old caulking may have to be removed. It is important to remember that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and can decrease the efficiency of your energy usage.

Verify that the drainage holes do not have debris in them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more extreme cases, you may need to replace the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely the problem is related to the seal, not the frame. It is also possible to be fixed by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or it blows open with a breeze. Any competent DIYer can replace hinges in just a few minutes.

Like all mechanical parts hinges will wear out over time. It's very simple to change a window hinge but it's much simpler if you have someone to help you to hold the frame.

It is also important to verify that the uPVC hinges are opened and closed in the right direction. You can do this by looking for the arrow on each hinge, this indicates the direction in which the window should be opened.

Faulty window hinges could be caused by improperly opening the window in a certain manner or because of poor installation at the factory. It is usually possible to fix the issue by sending us a picture on our website. We will be pleased to offer you advice.

Regular lubrication of the hinges is also necessary. Applying an engineering lubricant that is light to the hinges is a great way to do this. We recommend using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more easily. It can also prevent corrosion and reduce the risk of sticking. It is recommended to do this once a year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different factors. The hinges can also become misaligned due to wear, creating gaps where the sash meets frame. These can be easily repaired by giving them a thorough clean, however if they are beyond repair it may be necessary to have them re-aligned or replaced. The second is the interlock, which is located on the hinge side of the window and can be misaligned. Again, it is possible to just give them a thorough clean, however in certain cases, it may be necessary to have these replaced.

These seals are susceptible to wear and tear or be damaged over time, allowing air escape. Installing high-quality weatherstripping will help to keep draughts at bay. Replace the upvc windows with low-emissivity glasses. This will help control indoor temperatures and decrease the possibility of draughts.

Another, and most effective methods to reduce draughts is by using a draught excluder. These are usually fabric tubes filled with some kind of filler. They can be put on top of your windowsill. These will keep your home warm by blocking out cold air.

Your upvc windows can continue to provide excellent insulation and security in your home with regular maintenance and repairs. It is crucial to recognise that all windows have a life span and there may come the point when it's more economical to replace them than repair them. If you are experiencing problems with your upvc windows, it's recommended to seek assistance from a professional as soon as possible.