Double Glazing Door Lock Repairs

Have your uPVC window or door mechanism started to fail? Maybe the window or door handles don't meet up correctly or are difficult to use.

You'll be wasting energy in the event that your double-glazed doors fail to work properly. This also increases the likelihood of burglaries. Owen the Locksmith can repair your door lock at an affordable cost.

Snapped Key

It can be frustrating when a key snaps inside the lock. It's also potentially an issue for security, since the door might not lock and leave you open to intrusion. Fortunately, there are quick fixes you can use to solve the problem and get your door working properly again.

First, remember to stay calm. If you get scared and start doing a lot of fumbling around, you might just end up pushing the damaged piece of the key further into the lock, making the situation worse.

Spray WD-40, or another penetrating lubricant, into the lock. This will allow the broken piece to come out more easily. You can also use a screwdriver to help break up any stuck pieces that could be blocking the way. If you have a chunk of the key stuck out then grab it using a paperclip or another thin metal object and pull it. Both methods work, but be careful not to push the damaged key piece further into the keyway.

Some paperclips have grooved edges that could be used to extract hooks and Jigsaw blades can also be used for this use. If you don't happen to have any of these items, you can bend a hook with needle-nosed pliers. Additionally, a pair of tweezers is a good way to grasp and remove the remaining piece of the key that was broken.

If you are unable to get the broken piece of the key out, try using a lock de-icer. It's available in many hardware stores and is used to freeze any moisture present inside the lock.

If none of these methods are working, it might be the time to contact locksmith. Fitlocks experts can quickly solve problems with uPVC door locks and mechanisms, including snapped keys and broken handles. They can also reconfigure your double glazing door mechanisms to make them easier to operate. You can schedule repairs to your double glazing repairs near me-glazing online or contact us to discuss your needs.

Broken Cylinder

A damaged cylinder poses an immediate security risk. A professional locksmith can easily repair the cylinder. A locksmith will have to tap the cylinder to repair it. They can do this with the hammer or any other tools, JOB-1683 but the most effective method is to use a long match or piece of wire. Position the match or the wire end near the keyway. The locksmith will strike the lock and break it open. This is far better than using a heavy hammer that could damage the lock.

The most frequent cause of cracks in the cylinder head is overheating. This can happen when the cylinder head and block are made of various metals like cast-iron and aluminum. When different metals heat up and cool down at different rates, it could create hotspots locally that expand faster than the rest of the cylinder head, leading to cracks.

Corrosion can be a cause of fractures in cylinders. When the cylinder head and the block of the cylinder are not properly maintained, this can cause corrosion or rust and cause them to expand at a greater rates than they should. In time, this could also cause cracks.

If your uPVC window or door lock is brittle and requires a lot more pressure to turn it could be due to a variety of causes. This issue could be caused by a faulty locking mechanism, or misalignment and also a worn out handle.

Fortunately, this is an easy and affordable fix for the majority of double glazing owners. A professional locksmith will typically be able to solve this problem within an hour of arriving at your property. They can fix the locking mechanisms, or replace the window handles and change the gearboxes, based on your particular requirements. A locksmith with experience will always be able advise you on the most cost-effective solution for your home. They can even recommend upgrades to the highest-security 3 Star TS007 euro cylinders that will provide an extra layer of protection against burglars. It is a small cost to enjoy the peace of mind that comes from knowing that your uPVC door is secure.

Broken Handle

Window handle locks have complex mechanisms that become less effective as time passes and use, so it's not a surprise they occasionally break. It isn't easy to determine the reason for the broken window handle lock and fix it correctly.

Fixing your broken handle, whether it's an internal locking mechanism or latch, will improve the security of your uPVC door and reduce the risk of draughts. It could be costly to replace or repair your handle if it is not done correctly and can also harm the frame and lock of your door.

Screwdriver When the window is open remove the screw that holds the handle. It should be located on the inside face of the back plate, which is usually covered by an attractive cover for the screw for aesthetic reasons. You should not lose any internal parts of the handle such as the levers and plates on either side. Ideally, keep them in the same order so you can replace them again if needed.

Then, using another screwdriver, loosen the screw that connects the handle to the spindle in the back. Once the screw is loose, take the handle off and remove the broken spindle. Replace it with a brand new one, ensuring it's the same size as the old one (you can typically find these on the internet or at hardware stores) and then securely screw it into the correct position. Do not overtighten the screw as this could damage the handle and the window frame.

Ensure the new handle is correctly installed Close the window and test the handle. It should work smoothly, and you will be able open your window after a few times.

Be sure to double-check that your uPVC window is closing properly while you're working with the handle. If they're not closing correctly, you could encounter damp or draughts in your home. It could also affect the energy efficiency of your home. A local window company, like Core Sash Windows, will be able to adjust the hinges on your window frames to ensure they shut correctly.

Broken Spindle

It is usually the case that the spindle inside a handle breaks rather than the handle itself. This is most frequent in uPVC tilt and turn windows. These windows require a handle to operate an locking device within the frame of the window. The handle is attached a central rod which activates mushroom-shaped locking cams that secure into the frame of the window keep. If the dead latch mechanism does not open when the handle has been turned, it is most likely the spindle is broken. This can be a problem that is frustrating.

There are solutions to this issue. A reputable locksmith can swiftly and effectively fix the issue. They will be able to take apart the window handle using a tool that can remove the wheel component of the mechanism where the spindle goes. This can be done without damage to the handle or the window frame.

After the wheel has been removed, the technician can examine the spindle to determine what has caused it to break. This involves disassembling the spindle and examining each component part, noting any damage or excessive wear. This procedure is typically carried out by technicians in a clean and safe environment.

Then, clean the damaged spindle. This will remove any dirt or other debris that might be preventing it from functioning normally. The spindle may then be repaired or replaced. If it is replaced, the technician can take an identical dowel size to the original and drill mating holes in both pieces of the spindle. This ensures that the new spindle is an exact fit with the handle.

If the damaged spindle is beyond repair, it could be necessary to replace it completely. Home centers offer generic replacements but if the design of your window is unusual then it is necessary to speak with a woodworker or cabinet maker who can make the exact part for you. Once the new spindle is installed, it can be attached to the handle by line up the screw holes on the handle with the frame's existing screws. Once the new handle is installed, you are now ready to operate your uPVC window.